|
Installation
Instruction
|
Don't
have Acrobat Reader?
Click
here
to download
|
|
| Accessories |
 |
|
| Installation |
| By
using a wrench or
other proper tool,
release the nut on
both sides of the
toilet to remove
the toilet seat
and lid. |
 |
 |
|
|
| 2.
PLACING THE MAIN UNIT TO
THE TOILET |
|
1. Slide the
mounting bolts
into the grooves
at the rear bottom
of the unit
according to the
distance of the
toilet mounting
holes.
|
|
2. Install the
main unit on the
toilet by
inserting the
mounting bolts to
the toilet
mounting holes.
Fit the core
packings and
plastic washers on
to the bolts from
below the toilet,
then tighten the
nuts securely.
|
|
|
 |
|
| 3.
Connecting the Branching
Valve |
1. Shut off water supply
to the water reservoir by
closing valve A. |
|
2.
Completely empty water
reservoir by flushing
repeatedly. Place a small
pan below shutoff valve
ball cock to catch any
remaining water in pipes
when unfastening the ball
cock coupling nut.
3.
Remove existing pipe A.
4.
Branching valve is
standard 1/2" in
size. When connecting
3/8", use the
conversion nut with
packing before connecting
the branching valve. And
then connect the branching
valve and valve-coupling
nut with packing.
|
|
| 4.
Attach Connecting Tubing |
Use the connecting
flexible pipe to connect
the body joint of the main
unit to the branching
valve with two packing.
Fasten the coupling nuts
at the body joint and the
branch outlet. |
| |
|
|
