SEAT MODELS
  aAce HS Bidet
  aBiffy Bidet
  aBio Bidet
  aBrondell Bidet
  aDaelim Bidet
  aSanicare Bidet
  aToto Bidet New Models
  aYoyo Bidet
 
  BIDET TOILETS
  aToto Neorest
 
  HANDHELD MODELS
  aSanicare 100
  aSanicare 200
  aSanicare 700
  aItalia
  aMini-shower
 
 PORTABLE MODELS
  aTravel Bidet
 
 BATHROOM ACCESSORIES
  aVitamin-C Hand Shower
 

Check the Compatibility Chart


 

Toilet Measurements

MEASURE TO FIT

 One-piece toilet
> A toilet sculpted into a seamless unit. The result is a sleek toilet with no crevices between the tank and bowl.
 Two-piece toilet
> A toilet that have a separate tank and bowl that are bolted together upon installation.
'A' Measurement 
 Round Bowl
> Measured from the middle of the two seat bolts on the back edge of the toilet (figure A) that equals 16.5 inches or less. 
 Elongated Bowl
> Measured from the middle of the two seat bolts on the back edge of the toilet (Figure A) that equals 16.5 or more. 
 'B' Measurment
> For both Round and Elongated bowls, measure the distances between the center of the two bolt holes. This measurement should be between 5-7 inches.

 

 

 

Have questions about our bidet products?
Give us a call at our number  (877) 852-2823  (702) 499-4891
fax number (702)  616-0502

 

Copyright © 1999-2007
Bidet-Bath-Fixtures.com a division of NSV Holdings Corporation
3155 East Patrick Lane, Suite #9, Las Vegas, NV 89120, USA

About Us | Privacy Policy | Toilet Measurements